Why Opt For Roof Replacement In Menlo
Park?
One of the most critical improvements towards your home has to be a top-notch Roof Replacement in Menlo Park. A new solid roof helps to protect the entire house from water damage and weather. Whenever the need for replacing a roof arises, it has to be made sure that the job gets done right. A licensed roofing contractor has to be hired that will not skimp on any of the following steps.
Remove the roof material that exists down to plywood
All the existing coverings of a roof have to be removed by an experienced contractor of roofing. It can either be a rolled material, tile, slate or shingle, but they must all be removed down to the sheered deck of the roof or the plywood. For a perfect Roof Replacement in Menlo Park, shingle manufacturers have specified that if the shingles get installed over these materials of roofing, then the warranty goes in vain.
The roofing tar paper has to be removed
Removal of the tar paper on roofing is necessary so that roofers can completely inspect the deck surface that exists, before the installation of undergarment and shingles. For a complete Roof Replacement in Menlo Park, the sheathing nails must be inspected and the sheathing has to be refastened. It is a must before replacing the roof.
Replacing Damaged Wood and Old Flashing
The rotten or damaged wood must be replaced for an ideal Roof Replacement in Menlo Park. This is because fastening to soft or rotten wood shall cause shifting of shingles, thus making the new roof leak right after it has been installed. Furthermore, existing flashing must be removed to the sheathing of roof deck. Rotten or damaged wood in areas like these may have to be replaced so that there are no structural problems caused in future.
Installing the underpayment
An underpayment has to be installed over sheathing before the roof shingles are laid. Titanium or tar paper of thirty to fifteen lbs is considered one of the major underpayment materials of roofing. Both of these work really well but titanium has been tagged as the better reflector among st the two. Although, it may cost more, undergarment of roofs, usually comes with guarantee or warranty of shingles for roof replacement fail for unknown reasons.
Ensuring continuous ventilation
A roof system that is improperly ventilated shortens life of the roof shingles. It must be ensured that replacement of roofs includes continuous level of ventilation at the roof’s peak and every area of the shingle starter’s beginning row. If roof designs do not permit ventilation, both at the bottom or peak, then single adequate roof vents have to be installed at calculated locations to allow the airflow needed.
Install Ridge cap or Hip
A ridge cap or hip has to be installed with the roof replacement of yours. Caps must be created for roof edge that is finished-looking. This shall also prevent penetration of water into a house.
Choosing quality shingles
The trick to replacing roofs lies in choosing shingles of high quality for extending the replaced roof’s lifespan. Therefore, it is highly recommended that a shingle which is dimensional is used for durability and beauty. To read more Click Here